| 1. | Alpine skis ; determination of fatigue indexes ; cyclic loading test
高山雪撬.疲劳指数的测定.周期性载荷试验 |
| 2. | Alpine skis . determination of fatigue indexes . cyclic loading test
高山滑雪板.疲劳指数测定.周期性载荷试验 |
| 3. | Cross - country skis ; determination of fatigue indexes ; cyclic loading test
越野雪橇.疲劳指标的测定.周期性载荷试验 |
| 4. | Cross - country skis . determination of fatigue indexes . cyclic loading test
速度滑雪板.疲劳指数的测定.周期性载荷试验 |
| 5. | Tests consist of three parts : material property test of panel , slippage coefficient test of bolt connection and cyclic load test of end - plate connections
试验共分3部分：钢板单向拉伸试验；连接抗滑移系数试验和端板连接循环加载试验。 |
| 6. | This paper includes three parts of research : ( 1 ) cyclic loading tests of sixteen interior joints with rectangualr columns and four joint subassemblages with circular columns
本论文进行了以下三方面的研究工作：进行了8组共16个矩形柱中间层中节点和4个圆柱节点组合体的低周反复加载试验。 |
| 7. | In this paper , by means of reversed cyclic loading tests on the specimens of long - span floor beams system , it analyzes the behavior of long - span floor beams system during the tests
本文通过两榀大跨度预应力次梁楼盖结构体系组合构件的反复水平加载试验，分析研究了大跨度预应力次梁楼盖结构体系的受力特性。 |
| 8. | However , even the newly promulgated national code on reinforced concrete structure gives no items on slw design , and no previous horizontal cyclic loading tests on slw structure has ever been published domestic or oversea
然而，新近颁布的混凝土结构设计规范和现行的钢筋混凝土高层建筑行业标准都没有关于短肢墙设计的具体条文；国内外也没有发现有关短肢墙结构体系低周反复试验的报导。 |
| 9. | Constant amplitude reversed cyclic load tests were simulated with the aid of software msc / fatigue . fatigue life predictions can be made for this class of connection using relationships analogous to the well - known manson - coffin strain - life equation for metals
本文使用msc / fatigue软件进行了常幅偏移下的性能分析，类似于著名的manson - coffin公式，建立了所研究节点的塑性转角和寿命的关系。 |
| 10. | Both static and cyclic load tests are conducted for a same size specimen . the purpose is to find the effect on shear strength from different height - width ratio , and to get the shear resistance limit by static and cyclic loading . according to test results , the improvement suggestions for the wall details and design are presented in this paper
同样尺寸的二个试件分别在顶端进行水平单调加载和水平方向低周往复加载抗剪试验一次，试验目的是测试墙体的不同高宽比对抗剪强度的影响以及墙体在单调加载及低周反复加载两种情况下的抗剪强度pu并做出比较，从而对墙体构造及设计提出改进建议。 |
